DIRECT CONNECT WITH THE KROWN 200 (CONT.)
AUTO (DIRECT) DIALING
Turn the Power Switch ON.
Indicates your TDD is ready
KROWN - KROWN 200 to operator.
If in acoustic mode, the Krown 200 will automatically change to and remain in Direct Connect when you plug your TDD into the phone line.
SHIFT + DIAL
TYPE NUMBER OR
If the TDD is not plugged into the phone line, the screen will display:
M
REDIAL
LINE NOT CONNECTED
TYPE NUMBER OR A-Z
DIALING 5551234
Check phone line and press [SHIFT] + [DIAL] again.
TDD is now ready to dial.
Choose phone number location M (for example) and dials.
If you want to use the Redial feature, do not turn the TDD off after you dial a number. Use [CTRL] + [9] to disconnect the telephone line.
CTRL + DIAL
Automatically redial the
CHECKING FOR DIAL TONE last number dialed
There is another unique feature that the Krown 200 provides. If you intend to use the Krown 200 behind a PBX or a telephone system that will send a second dial tone to your phone after you have dialed the access code for outbound calling (usually an 8 or a 9), the TDD will detect this secondary dial tone and dial the rest of the number automatically. This features is activated by using the + sign between the digits.
This feature may be used in keyboard dialing or memory dialing.
9 + 5 5 5 1 2 3 4 | 9 + 5 5 5 1 2 3 4 |
|
|
5551234 will be dialed after a short waiting time for a second dial tone.
HANG-UP KEY
CTRL + 9 | DISCONNECT (Y/N)? |
|
|
Y
DISCONNECTED
Note: When in Direct Connect it is possible to make several phone calls without turning the Krown 200 OFF between each call. To
14
