3: SETUP OPERATION MODE (CONT.)
KA300TX Transmitter, program the KA300RX with one KA300TX.
• Install the KA300TX on the existing sensors and KA300RX on the wall.
• Perform a test on each KA300TX,
USING ALARM MONITOR WITH WEATHER ALERT RADIO.
•Set operation code for the KWA300TX (weather alert transmitter).
•Select channel 3 on KWA300TX and record it into the label on channel LED of KA300RX.
•Turn on KWA300TX.
•Repeat code learning process if the operation code is different from the previous house code.
•Plug the KWA300TX to the weather alert through the external output pin.
•Test the weather alert siren to make sure the unit is set up properly.
WEATHER ALERT RADIO
INSTALL THE KWA300TX
ON THE WEATHER
ALERT RADIO
EXTERNAL OUTPUT
11