The information contained in this document is subject to change without prior notice.
Copyright Ó KTI. All Rights Reserved.
TRADEMARKS
Ethernet is a registered trademark of Xerox Corp.
WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equip- ment generates, uses, and can radiate radio frequency energy and if not installed and used in accor- dance with the instruction manual may cause harmful interference in which case the user will be re- quired to correct the interference at his own expense.
NOTICE:
(1)The changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment.
(2)Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
CISPR A COMPLIANCE:
This device complies with EMC directive of the European Community and meets or exceeds the fol- lowing technical standard.
EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment. This device complies with CISPR Class A.
WARNING: This is a Class A product. In a domestic environment this product may cause radio inter- ference in which case the user may be required to take adequate measures.
CE NOTICE
Marking by the symbol CE indicates compliance of this equipment to the EMC directive of the
European Community. Such marking is indicative that this equipment meets or exceeds the following technical standards:
•EN 55022: Limits and Methods of Measurement of Radio Interference characteristics of Information Technology Equipment.
•EN 50082/1:Generic Immunity Standard
•EN
- Part 2: Harmonics.
