2. Installing the Switch

The switch is designed to operate in workgroup environments without a complicated configuration procedure. It also features an auto-select 100- 240V, 50/60Hz power supply unit, which works in most countries around the world.

Before connecting the supplied power cord into the switch, check to see that the cord voltage and current rating conform to the standards of the country of operation.

2.1 Packing List

The switch has the following components shipped with it:

One switch unit

One AC power cord

4 rubber feet for desktop mounting

19-inch ack mount kit

Installation guide

2.2 Mounting the Switch

The switch can be placed on a desktop as a stand-alone unit. When in- stalling the switch on a desktop you need to attach the rubber feet at each corner of the unit. The rubber feet are included in the product pack- age. Allow enough ventilation space between the switch and the objects around it.

Figure 2-1 Desktop Mounting

4

Page 9
Image 9
KTI Networks 2028 manual Installing the Switch, Packing List, Mounting the Switch