In addition to the basic drivers, more updated information and driv- ers may be included in the driver media after this guide is published. Please refer to the \README.DOC file first for the latest informa- tion before you install any drivers.
4.2 BIOS Setup
Before installing the driver, it is recommended to run the system BIOS setup utility to check each PCI slot that contains a Fast Ethernet PCI adapter for the following PCI settings:
1.Enable/disable the PCI slot : make sure the PCI slot is enabled for the adapter.
2.Assign an IRQ number : make sure the IRQ number does not conflict with other
3.Enable bus mastering : the PCI slot must be enabled for bus mastering.
4.Enable the RWU or WOL function in BIOS, if it is available.
On a PCI
13
