WOL Installation

The adapter features :

1.One LAN controller which can support PCI power manage- ment interface and function.

2.One 3-Pin Wake on LAN (WOL) connector (JP2)

3.One PME setting jumper (JP1)

4.One Wake on LAN (WOL) cable

The 3-pin WOL connector (JP2) provides an interface to the sys- tem motherboard for auxiliary power and Power Management En- able signal through the WOL cable. The PME setting jumper (JP1) specifies the active level of the PME signal coming from the system motherboard. To install the cable, refer to section 2.2 for the details.

To support remote wake-up, the system motherboard must be fea- tured with RWU or WOL support in hardware and BIOS. One 3- pin WOL connector must be provided on the motherboard. Refer to your system motherboard manual to determine if it is remote wake- up capable.

In addition to the RWU-capable motherboard, an ACPI supported operating system, such as Windows 95 / 98, Windows NT 4.0 / 5 is also required to achieve RWU functionality.

5

Page 9
Image 9
KTI Networks 221TX/3 manual