Insignia 32" LCD TV/Blu-ray Combo, 1080p

Installing the stand or

provided screws.

 

5 Secure the stand column with the eight

wall-mount bracket

(M4 * 12)

 

Stand screws

Installing the stand

Tips

•Unplug the AC cord from the AC INPUT jack.

•Before beginning this process, make sure that you lay your TV/Blu-ray combo on a clean, safe, and cushioned surface to avoid any damage to your TV/Blu-ray combo.

•Do not touch or press the TV screen. The glass might break under pressure.

To install the stand:

1Remove the stand from the box and place it on a table or bench.

2Secure the stand to the stand column with the provided four screws and washers.

Stand screws with washers (M4 * 8)

Stand column

Stand

3Place your TV/Blu-ray combo face down on table, aligning the bottom of your TV/Blu-ray combo with the edge of the table. Place a towel or similar material between the screen and the table to protect the screen.

4Slide the stand column into the slot in the bottom of the TV/Blu-ray combo.

6Secure the stand cover (included) to the TV/Blu-ray combo with the two screws provided.

Screws (ST3 * 8)

Stand cover

7Place your TV/Blu-ray combo in an upright position on a flat surface.

Note

To remove the stand, reverse these steps.

www.insigniaproducts.com

5