KTI Networks NS-32LB451A11 Playing TV audio only, Automatically scanning for channels, Changing channel settings, Off, MENU, MENU, EXIT, MENU, ENTER, CHANNELS, CHANNELS

NS-32LB451A11 Insignia 32" LCD TV/Blu-ray Combo, 1080p

Playing TV audio only

When watching TV, you can turn off the TV picture and listen to the audio only.

To play TV audio only:

1Press MENU. The on-screen menu opens with the PICTURE menu displayed.

2Press or to select CHANNELS. The CHANNELS menu opens.

3Press to highlight Audio Only, then press or ENTER to access the Audio Only settings.

4Press or to select On or Off.

5Press MENU to return to the previous menu, or press EXIT to close the menu.

Notes

•After Audio Only is turned on, the TV picture will disappear within 10 seconds after the on-screen menu is closed.

•Audio Only works only when the input source is TV and your TV/Blu-ray combo is receiving a broadcast signal.

•To exit Audio Only mode, press any button except the power button. When you exit Audio Only mode, the Audio Only setting is automatically reset to Off.

Changing channel settings

Note

Unless otherwise noted, all tasks in this section are based on using the remote control.

Automatically scanning for channels

When you scan for channels, your TV/Blu-ray combo searches for channels with signals and stores the channel information in the channel list. When you press CH /CH , your TV/Blu-ray combo goes to the next or previous channel in the channel list.

If the TV signal source changes, for example you change from an outdoor antenna to cable TV (no box), you need to scan for channels.

To automatically scan for channels:

1Press MENU. The on-screen menu opens with the PICTURE menu displayed.

2Press or to select CHANNELS. The CHANNELS menu opens.

3Press to highlight Auto Channel Search, then press or ENTER to access the Auto Channel Search screen.

28 www.insigniaproducts.com