4To view the code for the first digit, press 1. Count the red LED blinks (for example, three blinks = 3), then write down the number in the appropriate code listing at the top of this column.
Note
If the LED does not blink, the code digit is 0.
5Repeat Step 4 for the four remaining digits, using 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit.
6To check for other device codes, repeat Steps 1 through 5, substituting the device button for the device you would like to check.
Using learningThis universal remote control includes a learning feature so you can add functions that are unique to your home entertainment devices (such as VCR Tracking Up or Down). However, there are some considerations to keep in mind.
Precautions•Your original remote controls must be in working order for learning to work properly.
•Learned buttons are
•Do not use the following buttons for learning: Device buttons or SET.
•Learning capacity is approximately 42 to 75 buttons, depending on the code being learned.
•Certain device functions are not learnable, including
•For optimum learning, avoid high levels of ambient light such as natural sunlight or
Note
Have your original remote controls handy before programming learning.
Programming a learned buttonTo program a learned button:1Place your Insignia remote control
2Locate the button on your original remote control that you want the Insignia remote control to learn. Press the mode button you want to learn functions on.
3Press and hold SET until the LED blinks twice, then release.
4Enter 9 7 5. The LED blinks twice.
Note
If more than 10 seconds pass between button presses, the remote exits programming.
If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button.
5Press the button on your TV’s remote control that you want to program. The feedback LED stays lit for three seconds, indicating that the remote is ready to learn.
6On the original remote, press and hold the button to be learned. Continue holding the button on the original remote until the Insignia’s LED blinks twice.
Note
If the red LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SET to exit programming and review the Precautions” above. After reviewing, start programming again at Step 1.
7Repeat Steps 4 and 5 to program another button. Once you have completed programming all the buttons you want, press and hold SET until the LED blinks twice to save all data learned.
Deleting a single learning buttonThis process returns the button to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the button (see “Programming a Learned button” above).
Note
If more than 10 seconds pass between button presses, the remote exits programming.
If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button.
To delete a single learned button:1Press the mode button that you want to remove the learned button from.
2Press and hold SET until the LED blinks twice, then release.
3Enter 9 7 6. The LED blinks twice.
4Press the button containing the learned function to be deleted, twice. The LED blinks twice and programming ends.
Deleting all learned buttons in a specific modeNote
If more than 10 seconds pass between button presses, the remote exits programming.
If the LED displays one long flash instead, replace the batteries. If the remote control continues to display one long flash, the remote control cannot learn a new button.
To delete all learned buttons in a specific mode:1Press and hold SET until the LED blinks twice, then release.
2Press 9 7 6. The LED blinks twice.
3Press a mode button twice (for example, TV), STB, or AUX) to clear all the learned buttons for that mode. The LED blinks twice and programming ends.
12 | www.insigniaproducts.com |