Insignia 32" LCD TV/Blu-ray Combo, 1080p

Making connections

Connecting the power

To connect the power:

•Plug the power cord into the AC INPUT jack on the back of your TV/Blu-ray combo and into a power outlet.

Connecting an antenna or cable TV (no box)

To connect an antenna or cable TV (no box):

1Make sure that your TV/Blu-ray combo’s power cord is unplugged.

2Connect one end of a 75 ohm coaxial cable to the antenna or cable wall jack, then connect the other end of the cable to the ANT/CABLE IN jack on the back of your TV/Blu-ray combo. If your antenna cable has a 300 ohm twin-lead connector, use a 300-75 ohm adapter.

Back of TV/Blu-ray combo

Warnings

• Do not connect your TV/Blu-ray combo to

power using any device other than the supplied

AC power cord. This could cause fire, electrical

shock, or damage.

• Do not use with a voltage other than the power

voltage displayed on the label on your

75 ohm coaxial cable

Note

Antenna jack

TV/Blu-ray combo. This could cause fire,

electrical shock, or damage.

• Do not plug or unplug the power cord when

your hands are wet. This may cause electrical

shock.

• The AC cord has a grounding-type AC line plug.

If the supplied AC cord does not match your

power outlet, contact a qualified electrician to

replace the obsolete outlet. Do not defeat the

purpose of a grounded plug. This could cause

fire or electrical shock.

•Always unplug the coaxial cable when you move your TV/Blu-ray combo.

•If you switch between antenna and cable, install an antenna selector.

•If you need help connecting cable TV, contact your cable TV provider.

Cautions

•When your TV/Blu-ray combo is not used for a long time, unplug it from the power outlet.

•If you need to replace the supplied AC cord, contact customer service.

www.insigniaproducts.com

15