Insignia 32" LCD TV/Blu-ray Combo, 1080p

Aiming the remote control

6

Aim the remote at the device and press

To use the remote control:

 

 

(power). The device should turn off. If it does

 

 

 

not, repeat Steps 3 through 5, trying each code

Point the remote control directly at your TV/Blu-ray

 

for your brand until you find one that works. If

combo, within a 60° angle horizontally (30° to either

 

you cannot find a code that works, see

side) and within 30° vertically of the remote control

 

“Searching for your code” below.

sensor on the front of your TV/Blu-ray combo, and

7

Repeat Steps 1 to 5 for the other devices you

within 15 feet (4.6 meters) of your TV/Blu-ray

 

want to control. For future reference, write down

combo.

 

each working device code.

15 feet

(4.6 meters)

Caution

Do not expose the remote control to liquids, direct sunlight, or shock.

Notes

•Objects between the remote control and the remote control sensor may block the remote control signal.

•The range of the remote control may be diminished if direct sunlight or other strong light is shining at the remote control sensor. In this case, change the angle of the lighting, move your TV/Blu-ray combo, or operate the remote control closer to the remote control sensor.

Searching for your code

If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed, try searching for your code.

To search for your code:

1Turn on the device you want to control.

2Press the device button on your TV remote control (TV, STB, or AUX) once.

3Press and hold SET until the red LED blinks twice, then release.

4Enter 9 9 1. The LED blinks twice.

5Press the number that matches your device type.

•0—Cable converters, video accessories, satellite receivers

•1—TVs

•2—VCRs, DVD players, Blu-ray Disc players

•3—Audio amplifiers, audio amplifiers/tuners, CD players

6Aim the remote at the device and press

(power). The remote sends IR codes from its library to the selected device, starting with the most popular code first. If the device responds, go to Step 8.

7If the device does not respond, press CH and the remote tests the next code for that device

type. Continue to press CH until the device turns off.

Programming your universal Insignia remote control

Note

Press CH to try the previous code.

To program your remote control:

1Find the codes for the devices you want to program in “Remote control codes” on page 66 and write them down or highlight them.

2Turn on the device (for example, a DVD player) and, if needed, load media such as a DVD.

3Press the device button on the TV remote for the device that you want to program (TV, STB, or AUX).

4Press and hold SET until the red LED blinks twice, then release.

5Enter the first five-digit code for the device and brand that you want to program. The LED blinks once as each digit is entered. If the code is valid, the LED blinks twice.

Note

If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.

8Now that you have found the correct code, press SET to save the code that worked for your device. The LED blinks twice to indicate that the code has been saved.

9To search for other device codes, repeat Steps 1 to 8.

Checking the codes

If you have set up the remote using the procedure in “Searching for your code” on page 11, you may need to find out which five-digit code is operating your equipment.

To find out which code is assigned to your TV (for example):

1Press TV once.

2Press and hold SET until the red LED blinks twice, then release.

3Enter 9 9 0. The LED blinks twice.

www.insigniaproducts.com

11