Kuppersbusch USA EEB 9800.0 manual Additional functions

Automatic turn-on and shut-off

If you wish use the oven’s time-delay feature, you may pre-select both cooking time and finish time. The automatic start time itself cannot be specified, but this is derived from both settings.

Example:

It is 8.00 and you wish to have your roast ready at 13.00. The roast needs to be cooked for 90 minutes.

– Change the cooking time ufrom 0.00 to 1.30.

– Then change the finish time n from 9.30 to 13.00.

–Confirm with j.

The oven turns on at 11.30 and off at 13.00.

Change automatic weight d / weight system

In the roasting programes and the ”Bread Z” baking programe, cooking time and temperature can be selected dependent on the weight. The text display requests you to select the weight of the food to be cooked.

In these programes, input weight immediately after selecting the programe.

Switching the oven off

–Touch the key e.

The oven is switched off.

ΦIf you have accidentally turned the oven off while a programe is running, you can resume that programe.

Additional functions

Rapid heating J

Use this function to have the oven heat at higher performance to the temperature set.

ΦThe ”Rapid heating” J function can be added in many heating programes. (See ”Using your oven” on page 8.)

–Choose a heating programe and then touch ”Rapid heating” J. Both sensor keys light up red.

–Select all the values as usual and confirm your input with j.

ΦWhen heating has completed, the illuminated ”Rapid heating” symbol J no longer shows red.

Memory function M / N

The oven has a memory function you can use to store two programes you have composed yourself as additional programes.

Saving an additional programe:

–Select a baking, roasting or heating programe.

–Set the desired temperature and time.

–Then select ”Rapid heating” J if applicable.

–Hold the memory sensor M or N depressed, until the text displays <programe saved>.

The programe set can now be saved with M or N and can be used like every other baking, roasting or heating programe.

Resuming interrupted programes

Did you accidentally turn the oven off while a programe was running?

–Switch the oven on again. The text display will ask you: <progr. interrupted! Continue? OK>

–Confirm by touching j.

Blend in the actual oven temperature

– Touch the key g. The current oven temperature is briefly displayed.

Choosing an additional programe:

–Press the M or N sensor and confirm by touching j. The programe starts.

The values set can be changed without such changes being saved.

EEB 9800.0 USA 9