Basic Operation
3-18 OPERATION GUIDE
Canceling Communications
Enables canceling communication in progress. The method for canceling
depends on whether transmission was initiated from memory transmission
mode or direct transmission mode. Different methods for canceling
communications are described below.
NOTE: For instructions on canceling timer-based transmission jobs, refer
to Deleting a Job in Memory on page 4-11.
Canceling Memory Transmission
Transmissions initiated from memory transmission mode are processed in
the background. Background processes must be canceled in Status/Job
Cancel mode. Perform the following procedure to cancel the transmission.
1Press Status/Job Cancel.
2Press S or T to select Send Job Status. Press Enter.
3Press S or T to select the job to cancel. Press left Select.
NOTE: To check transmission details, press right Select. Refer to Send
Job Status on page 5-47 for details.
4Press left Select to cancel
transmission of that particular job.
Canceling Direct Transmission
All transmissions initiated from direct transmission mode are processed in
the foreground, and the status of these transmissions is always indicated
on the message display. Perform the following procedure to cancel the
transmission.
1Press Send. The Send indicator is lit and the FAX System enters Send
mode.
2The transmission status is shown on the message display. Confirm the
details.