5-16
Sending Functions
Continuous Scan
When the multi-page originals cannot be placed in the document processor at one time, the originals can be scanned
in separate batches and then sent as one job. With this function, originals can be scanned one after another until you
press [End Scan] (the Right Select key).
The procedure for using continuous scanning when sending scanned images is explained below.
1Press the Send key.
2Press the Function Menu key. Function Menu appears.
3Press the U or V key to select [Continuous Scan].
4Press the OK key. Continuous Scan appears.
5Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
6Specify the destination.
7Place the original, and press the Start key.
8Place the next original, and press the Start key. Scan the
remaining originals by the same procedure.
When you have scanned all the originals, press [End
Scan] (the Right Select key) to start sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Function Menu:
a
b
*********************
2
Original Size
T
3
Original Image
T
[ Exit ]
1
Color Selection
T
Continuous Scan:
a
b
*********************
2
On
1
*Off