8
8-141
Default Setting (System Menu)
LDAP Security
Specify the protocol to be used for LDAP. The default setting is Off.
Use the procedure below to make the setting.
1In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2The System menu appears.
3Press the U or V key to select [Network Setting].
4Press the OK key. The Network Setting menu appears.
5Press the U or V key to select [Secure Protocol].
6Press the OK key. Secure Protocol appears.
7Press the U or V key to select [LDAP Security].
Sys. Menu/Count.:
a
b
1
Report
2
Counter
*********************
[ Exit ]
3
System
Login User Name:
L
b
*******************
Login Password:
[ Login ]
System:
a
b
*********************
2
I/F Block Set.
3
Security Level
[ Exit ]
1
Network Setting
Network Setting:
a
b
*********************
8
Host Name
9
LAN Interface
[ Exit ]
7
Secure Protocol
Secure Protocol:
a
b
2
IPP Security
3
HTTP Security
*********************
[ Exit ]
4
LDAP Security