3-8
Basic Operation
6Remove the finished copies from the top tray.
Adjusting Density
Use this procedure to adjust the density when copying.
NOTE: You may choose Auto mode as the default setting (refer to Densityon page 8-45).
The procedure for adjusting the density of copies is explained below.
1Press the Function Menu key. Function Menu appears.
2Press the U or V key to select [Density].
3Press the OK key. Density appears.
4Press the U or V key to select [Auto] or [Manual].
5Press the OK key.
When [Manual] is selected, Manual appears. Press the
U or V key to select your desired density and then press
the OK key.
Completed. is displayed and the screen returns to the
basic screen.
6Press the Start key. Copying begins.
Density Adjustment Option Description
Manual Adjust density using 7 levels.
Auto Optimum density is selected according
to the density of the original.
Function Menu:
a
b
*********************
2
Collate
T
3
Duplex
T
[ Exit ]
1
Paper Selection
T
Density:
a
b
1
Auto
*********************
2
*Manual
Manual:
a
b
3
v
Lighter -1
*********************
5
y
Darker
+1
4
w
Normal
0