5-20
Sending Functions
5Press the U or V key to select [From Oper. Panel].
6Select the destination computer from the computer list.
Press [Detail] (the Right Select key) to see the
information of the selected computer.
7Press the OK key to confirm the destination, and then
press the Start key. Transmission starts.
NOTE: To change the destination computer, press the Back
key and then press [Yes] (the Left Select key). This brings
you back to step 6.
NOTE: To use WSD Scan from your computer, press [From
Computer] in step 5 and then scan the original from the
computer.
Select Computer:
a
b
*********************
P
Computer02
P
Computer03
[ Cancel ] [ Detail ]
P
Computer01
Press Start Key.
P
:Computer01