Kyocera KX444 manual Setting roaming alerts and ringers

Timing your calls

You can set your phone to beep 10 seconds before each minute passes when you are on a call.

•Select Menu → Settings → Sounds → Minute Alert → Enabled.

Receiving data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. You cannot receive voice calls while the phone is in data/fax mode. For more information, see “Data settings” on page 41.

Setting roaming alerts and ringers

Setting an alert for roaming

You may use this setting if you want the phone to alert you when you roam outside of your home service area.

1.Select Menu → Settings → Network → Roam/Svc Alert.

2.Select an option and press .

–When no svc alerts you with three tones decreasing in pitch when service is lost and three tones increasing in pitch when service is acquired again.

–Roam Change alerts you with two decreasing tones when roaming service is acquired and three increasing tones when home area service is acquired again.

–Any Change alerts you with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.

Setting the roam ringer

You can set a ringer to indicate when an incoming call will be subject to roaming charges.

1.Select Menu → Settings → Sounds → Roam Ringer.

2.Highlight Enabled and press . You’ll hear a sample of the ringer.

3.Press to set the ringer.

Setting Call Guard to avoid roaming calls

You can set your phone to warn you before you answer or place a call while roaming.

•Select Menu → Settings → Convenience → Call Guard → Call prompt.

The phone makes a distinctive ring to indicate an incoming call while you are roaming, and you

must press to accept the call or to place a call while roaming.

16 Making and Answering Calls