Kyocera KX444 manual Setting position location, Connecting to a TTY/TDD device

4.Press to select an option:

–Voice only—Allow only voice calls.

–Fax, next call or Data, next call—Set the phone to fax mode or data mode for the next incoming call or the next 10 minutes.

–Fax, until off or Data, until off—Force the phone into fax mode or data mode until the phone is turned off.

Note: You cannot receive voice calls while the phone is in data/fax mode, or if you are on a PTT call.

Connecting to a TTY/TDD device

You can connect the phone to a TTY device for the hearing impaired.

Note: Enable TTY only when using the phone with a TTY device.

1.Connect the TTY device to the phone.

2.Enter from your keypad.

3.Press to select the TTY option.

Setting position location

This setting allows you to share your location information with network services other than emergency services (911, 111, 000, etc.), in markets where service has been implemented.

Note: This feature works only when your phone is in digital mode. You do not have the option of turning off the locator to emergency services.

1.Select Menu → Settings → Network → Location.

2.If you see a message prompt,

press to continue.

3.Select 911 Only or Location On.

–911 Only (default) shares your position information only with emergency services when you call your 3-digit emergency code (911, 000, 111, 999, etc.).

–Location On shares your position information with the service provider network, in addition to emergency services.

For information on emergency calls, see “Calling emergency services” on page 12.

42 Customizing Your Phone