Kyocera KX444 Adding a signature, If you cannot send messages, Understanding appended messages

–Save AutoTextÔSave the message you have just entered as a prewritten message, then return to the message entry screen so you can send the message.

2.When you have finished setting options, press

to return to the message window.

3.Highlight Send and press .

Adding a signature

This setting allows you to create signature text. The signature does not appear in the message creation screen; however, the signature is included at the end of all outgoing messages.

To create a signature

1.Select Menu → Settings → Msg Settings → Signature.

2.Enter your signature in the text field.

3.Press to save the setting.

Note: The signature text is tallied by the character counter because the signature is included in the text field.

If you cannot send messages

You may not be able to send or receive messages if your phone’s memory is nearly full, or if digital service is not available at the time. To free up memory, erase old messages. See “Erasing messages” on page 31.

Understanding appended messages

Characters remaining

Text entry field

If you go over the character limit for a single message, the phone may automatically append an empty segment to your message to make space.

Important: You will be charged for each message segment.

When you start a message, the maximum character limit (“160” in the example) appears above the text entry screen. This number counts down as you enter characters, until it reaches 0. If you continue to enter text after this counter reaches 0, a message segment may be appended. If a segment is appended, a message will appear on the phone screen.

Receiving incoming calls while creating messages

You may receive standard or PTT calls while creating messages.

User Guide for the Kyocera KX444 Phone 27