4.Enter additional phone numbers, email addresses, Web addresses and note, if needed. Scroll up or down to move through the contact fields.
5.When you are done entering information, select Save.
Add code or extension
When you save the phone number of an automated service, you may include a pause to stop dialing. For example, a pause where you would wait to dial an extension.
1.From the home screen, enter a phone number.
2.Select Options and a type of pause:
–Time Pause causes the phone to stop dialing for two seconds.
–Hard Pause causes the phone to stop dialing until you select Release while making the call.
3.Enter the remaining numbers and select Save.
4.Select Save New Contact.
5.Complete the contact and select Save.
Working with contacts
Contact details
To edit details of an existing contact:
1.Select Menu > Contacts > View All.
2.From the contacts list, select a contact.
3.At the contact’s detail screen, select Edit.
4.Edit or add phone numbers, email addresses, Web addresses, Street addresses, and notes. Scroll up or down to move through the contact fields.
5.When you are done entering information, select Save.
Contact name
To work on the name of an existing contact:
1.Select Menu > Contacts > View All.
2.From the contacts list, select a contact.
3.At the contact’s detail screen, highlight the name.
4.Select Options and one of the following:
–Ringer assigns a specific ringer to the contact.
–Picture assigns a specific picture to the contact.
–Erase Contact erases the entire contact.
–Send as vCard sends the contact as a vCard.
Contact number
To work on the number of an existing contact:
1.Select Menu > Contacts > View All.
2.From the contacts list, select a contact.
3.At the contact’s detail screen, highlight a contact number.
30 | Working with contacts |
