La Crosse Technology WS-1610TWC-IT quick setup manual Rain sensor

important to test all components for correct function before placing and mounting them at their final destinations (See Positioning below)

1.Unwind the cables of the Rain and the Wind sensors. Connect the Rain and the Wind sensors to the Thermo-hygro sensor by plugging the connector heads of the two sensors into the appropriate sockets of the Thermo-hygro sensor.

Sockets for wind

and rain sensor

2.First insert the batteries into the Thermo-hygro sensor (see “How to install and replace the batteries into the Thermo-hygro sensor“ below).

3.Then insert the batteries into the Weather Center (see “How to install and replace the batteries into the Weather Center” below). Once the batteries are installed, all segments of the LCD will light up briefly and a short signal tone will be heard. It will then display the time as 12:00, the date as 1.1.05, the weather icons, and air pressure value. "- - -" will be shown for outdoor data.

4.Afterwards, the Weather Center will start receiving data from the transmitter. The outdoor temperature, humidity wind chill and wind speed should then be

7