XI. MANUALLY SETTING THE RELATIVE AIR PRESSURE
1.Press the SET button thirteen times to enter the Manual Setting of the Relative Air Pressure mode.
2.The air pressure digits in LCD 4 will flash. Use the CH/+ button to set the appropriate Relative Air Pressure (check local weather service).
3.Press the SET button to confirm, and to advance to select the Bar Graph Display.
XII. SELECTING BAR GRAPH DISPLAY
Note: LCD 5 can display the History Bar Graph in 3 different ways. 1) It can show the Rain History only, 2) it can show the Air Pressure History only, or 3) it can alternate between the Rain History and the Air Pressure History (the default setting).
1.Press the SET button fourteen times to enter the Bar Graph Display Setting.
2.The bar graph in LCD 5 will flash, alternating between the “RAIN” history and the “PRESSURE” history.
3.Using the CH/+ button select the Bar Graph Display to be shown in LCD 5.
4.Press the SET button to confirm, and to exit the program mode.
10
