La Crosse Technology TX5U, WS-7095U, TX4U instruction manual Weather Center, LCD Screens

C.WEATHER CENTER

1.Remove the battery cover. To do this, place a solid object in the space provided at the lower- central position of the battery cover (the cover has white writing on it) then push up and pull out on the battery cover.

2.Observe the correct polarity, and install three C batteries.

3.Replace the battery cover.

THE LCD SCREENS

Battery

Cover

Battery

Compartment

Immediately after the batteries have been installed, the LCD (Liquid Crystal Display) Screens will completely light up for a brief moment. There are 6 LCD Screens, each displaying different information.

Note: After the LCD Screens briefly light up, “267” will appear in the LCD 1, then the LCD’s will display the default settings. A low-battery warning-icon appears in LCD 1 beside the “TIME” icon (this should not be on). There is also a satellite icon that appears in LCD 6, under the “MAX” icon—this icon informs the user that the Weather Center is receiving signals from the sensors. Within 12 minutes the Outdoor temperature and humidity should be displayed— if not, remove batteries from all units and repeat battery installation.

Following is a general display description of each LCD. Details concerning the LCD Screens will be explained during the complete Programming sections and the Features & Operations sections.

LCD 1

LCD 2

LCD 1—shows the time.

LCD 2—moon phases and dates. LCD 3—indoor temperature/humidity. LCD 4—forecast icons and air pressure. LCD 5—rainfall/air pressure histories,

and rain quantity.

LCD 6—outdoor temperature/humidity.

,1

LCD 3

P„

LCD 4

LCD 5

LCD 6

5