La Crosse Technology TX4U, TX5U Detailed Set-Up Guide I. Battery Installation, B. Rainfall Sensor

Battery Compartment

DETAILED SET-UP GUIDE

I.BATTERY INSTALLATION

Batteries will fit tightly. To avoid start-up problems, make sure that the batteries do not spring free.

A.REMOTE THERMO-HYGRO SENSOR

Mounting

Bracket/Receptor

Rain Cover

Battery Cover

Thermo-Hygro

Sensor

1. Pull the cylindrical rain cover off the sensor.

2. Remove the battery cover (located on the backside of the sensor, above the mounting post and bracket). Press the arrow and slide the battery cover off.

3. Observing the correct polarity install 2 AA batteries.

4. Replace battery cover, and place rain cover snugly onto the sensor.

B. RAINFALL SENSOR

1. Remove the flat-head screw and battery cover, located on the underside of the base.

2. Observe the correct polarity, and install two

AA batteries.

3.Make sure the rubber weather seal is in place and replace the battery cover and screw.

4