To complete the set up of your indoor temperature station after the 15 minutes have passed please follow the steps below.
1.Press and hold the “SET/CH” button for 5 seconds.
Note: A “12h” or “24h” will appear on the top line. (“12h” for AM/PM, “24h” for military time)
2.To change between “12h” and “24h” press and release the “MIN/MAX” button.
3.When you have your choice shown on the display press and release the “SET/CH” button once.
Note: if “12h” is selected, the temperature is displayed in degree Fahrenheit. If “24h” is selected, the temperature is displayed in degree Celsius
4.An hour will now be flashing.
5.Press and release the “MIN/MAX” button until the correct hour is shown.
Note: When in the 12h mode there is “PM” displayed under the word TIME when in the PM hours. During the AM hours this area will be blank.
7
