LaCie Biggest Quadra | Using the Biggest Quadra |
User Manual | page 36 |
|
|
5.2. LCD Display Messages
The status of the LaCie Biggest Quadra controller and array can be viewed through the LCD Display. By using the Menu button to scroll through the messages, the following information is available:
RAID level and capacity | Disk model | Disk DMA mode and capacity |
Firmware version | Serial number | Fan and temperature status |
■5.2.1. Initialization Messages
These LCD Display messages may appear during the Initialization phase.
LCD Display |
| Message | Message Cleared When... | |
RAID INIT xx.x% | New RAID array being created. | ❖ Initialization completed successfully | ||
| ❖ Initialization failed | |||
Total: xxxxGB |
| |||
Create New RAID? | ❖ If the disks have been installed and a | |||
| new RAID array has been created | |||
(No) | (Yes) |
| ||
|
|
| ||
RAID INIT 100% | Initialization completed successfully. | ❖ The | Enter button is pressed | |
|
|
| ||
xxxxGB INIT OK! |
|
|
| |
RAID INIT Failed | Disk “x” failed during the initializa- | ❖ The | Disk is replaced | |
tion and cannot be accessed. |
|
| ||
Dx offline |
|
| ||
|
|
| ||
RAID INIT Failed | Too many bad sectors on Disk “x.” | ❖ The | Disk is replaced | |
Initialization cannot proceed. |
|
| ||
Dx Bad sectors |
|
| ||
|
|
| ||
