LaCie SAFE Hard Drive
User Manual
nData Transfers
Data transfers are the flow of data that ac- complishes a task, usually related to moving data for storage to computer RAM or between storage devices. During data transfers, it’s best to wait be- fore launching other applications on the same USB
2.0port. Anomalies may arise with computers that have USB 2.0 controllers (see technical note) that do not conform to OHCI (Open Host Controller Interface) standards. In any other configurations, we cannot ensure 100% correct operation. Due to this, you may encounter hanging problems. If this happens, proceed as follows:
1.Make sure that the USB 2.0 cable is connected tightly and securely on both ends of the cable, from the drive to the computer. If you are us- ing a USB 2.0 cable other than the one supplied with your LaCie drive, check that it is USB 2.0 certified. The cable that is provided with your LaCie drive is USB 2.0 certified.
2.Disconnect your computer’s USB 2.0 cable. Wait 30 seconds. Reconnect.
Helpful Information
page 32
CAUTION: Do not connect USB 2.0 cables so that they form a ring of devices. There is no need for terminators on USB 2.0 devices, so the unused USB 2.0 connectors should be left empty.
Technical note: Controller – This is a component or an electronic card (referred to in this case as a “controller card”) that enables a computer to communicate with or manage certain peripherals. An external controller is an expansion card which fills on of the free slots (for example, PCI or PC- MCIA) inside your PC and which enables a peripheral (such as a