Land Pride

Table of Contents

Section 1: Assembly & Set-up

IMPORTANT: Do not pull a trailer or implement exceeding 300 pounds towing capacity and 50 pounds tongue weight. Loss of control may result. Do not make turns that will cause a trailer or implement being towed with the hitch to come in contact with the mower or damage may result.

Electrical Cable Connection

Refer to Figure 1-3:

!WARNING

Incorrect battery cable connections can damage mower’s electrical system and cause battery cables to spark. Sparks around a battery can result in a battery gas explosion and personal injury.

Connect the black negative battery cable to the battery’s negative post with 1/4"-20 x 3/4" GR5 hex head serrated screw, flat washer, lock washer and nut before starting the mower. Tighten hex nut to 8 ft. lbs. of torque.

Engine Preparations

1.Check engine oil level at the dipstick. Add oil if oil is below the full mark on the dipstick. Do not overfill. Refer to engine manual for oil recommendation. Also see "Engine Oil and Oil Filter" instructions on page 32.

NOTE: Vehicles are shipped from the factory with about a quart of fuel in the tank.

2.See "Fuel System" instructions on page 31 before adding fuel. Add fuel to the fuel tank.

•Always disconnect negative (black) battery cable before disconnecting positive (red) cable.

•Always reconnect positive (red) battery cable to the positive (+) post before reconnecting negative (black) cable to the negative (-)post.

!WARNING

Keep battery terminals from touching any metal mower parts when removing or installing the battery. Do not allow metal tools to short between the battery terminals and metal mower parts. Shorts caused by battery terminals or metal tools touching metal mower components can cause sparks. Sparks can cause a battery gas explosion which will result in personal injury.

Black Negative

Battery Cable

Negative

Post

Connecting the Negative Cable

Figure 1-3

IMPORTANT: The negative battery cable is disconnected before leaving the factory and is to be disconnected after initial dealer set-up to prevent battery discharge while setting on the dealer lot.

Remove Mower From Crate Floor

IMPORTANT: Thoroughly read and understand

"Section 2: Operating Procedures", pages 10 to 18 before starting and moving the mower.

1.Make a ramp in front and level with the crate floor to be used for driving the mower off.

2.Check under the mower to make sure it is not banded to the crate floor. Remove any bands that are still present.

3.Follow all precautions and operating information provided in "Section 2: Operating Procedures" before starting and driving the mower off.

4.Raise deck fully up.

5.Start the engine and drive the mower forward off the crate floor.

6.Make necessary adjustments to the mower as outlined in "Section 3: Adjustments" beginning on page 19.

2/27/07

Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-044M

9

Page 10 Page 12
Page 11
Image 11
Land Pride 357-044M manual Electrical Cable Connection, Engine Preparations, Remove Mower From Crate Floor
Page 10 Page 12

357-044M specifications

The Land Pride 357-044M is a cutting-edge implement designed to meet the needs of professionals and enthusiasts in the agricultural sector. Known for its robust construction and innovative features, this attachment is ideal for enhancing productivity in various land management tasks.

One of the main features of the Land Pride 357-044M is its heavy-duty design, which is specifically built to withstand the rigors of daily use in demanding environments. The durable frame ensures longevity, allowing operators to tackle tough soil conditions without worrying about equipment failure. Additionally, the implement is equipped with high-quality materials that resist wear and tear, providing peace of mind for long-term reliability.

The 357-044M shines in its versatility. It can be used for a variety of applications, such as leveling ground, grading, and even snow removal in winter months. With adjustable features, operators can easily modify the attachment to suit specific job requirements, making it a multi-functional tool for land preparation.

Equipped with advanced technologies, the Land Pride 357-044M includes precision-engineered components that optimize performance. The attachment’s unique blade design enhances soil mixing and aeration, leading to improved crop yields. Furthermore, the implement's innovative hydraulic system allows for smooth and efficient operation, ensuring that the tool can be adapted to different tasks with minimal effort.

Operator comfort and efficiency are also key characteristics of the 357-044M. The implement features user-friendly controls, making it easy to operate even for those who may be unfamiliar with such equipment. The design takes into account ease of attachment and detachment from various tractors, promoting a seamless workflow on the job site.

In summary, the Land Pride 357-044M is a versatile and dependable implement that combines a robust design, innovative technologies, and operator-friendly features. Its ability to perform multiple tasks makes it an essential addition to any agricultural operation. With a focus on durability and efficiency, this attachment is sure to stand the test of time while delivering the performance that land management professionals demand.
Top Page Image Contents