Table of Contents

Section 3: Adjustments

Land Pride

Refer to Figure 3-12:

9.Start the leveling process on the left front side of the mower.

10.Set the amount of threads on the deck lift rod to protrude approximately 1” pass the lift block.

11.Jam both nuts against the lift block.

12.Push or pull on the deck lift foot pedal until the chain on the left front just becomes tight, making sure that the deck stays tight against the 3” block.

Lift

1” Protrusion

Deck Lift

Assist

Block

 

 

Spring

 

 

 

1”

 

Deck

Lift Rod

Nuts

 

Left Front

23690

Deck Lift Chain

Deck Lift Rod Adjustment (Left Front Side Shown)

Figure 3-12

Refer to Figure 3-11:

13.While keeping the left front chain tight, tighten the nuts against the deck lift block on the height indicator rod.

Refer to Figure 3-10on Page 23:

14.Go to the right front of the mower.

15.Loosen the 5/16” jam nut for the 5/16" adjuster bolt and then back the adjuster bolt out to allow the adjuster to move up and down freely.

16.Be sure that the adjuster is free to move up and down. Tighten the adjuster bolt until the chain just becomes tight. Make sure the deck stays tight against the 3” block.

17.Tighten the adjuster bolt jam nut to prevent the adjuster bolt from moving.

18.Tighten the hardware holding the chain and adjuster onto the deck lift arm.

Refer to Figure 3-13

19.Go to the right rear of the mower.

20.Make sure that there is still slack in the back right lift chain. If not, loosen the two nuts (“A” & “B”) on the lift block until there is slack in the right rear deck lift chain.

21.Tighten “B” nut until the chain just becomes tight, making sure that the deck stays tight against the 3” block.

23691

Threaded Rod

“A” Nut

Lift Block

“B” Nut

Right Rear

Deck Lift Chain

Deck Lift Rod Adjustment (Right Back Side Shown)

Figure 3-13

Refer to Figure 3-14:

22.Go to the left rear of the mower.

23.Make sure that there is still slack in the chain. If not, loosen the two nuts (“A” & “B”) on the lift block until there is slack in the left rear deck lift chain.

24.Tighten “B” nut until the chain just becomes tight, making sure that the deck stays tight against the 3” block.

25.Tighten both RH and LH “B” nuts one more full turn to raise rear of the deck to be approximately 1/4" higher than the front.

26.Tighten “A” nut on both sides to jam it and “B” nut tightly against the lift block.

23690

Lift

 

 

Block

Deck

Lift Rod

“A” Nut

“B” Nut

Left Rear

Deck Lift Chain

Deck Lift Rod Adjustment (Left Rear Side Shown)

Figure 3-14

24 Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-044M

2/27/07

Page 25 Page 27
Page 26
Image 26
Land Pride 357-044M manual Refer to -10on, Deck Lift Rod Adjustment Left Front Side Shown
Page 25 Page 27

357-044M specifications

The Land Pride 357-044M is a cutting-edge implement designed to meet the needs of professionals and enthusiasts in the agricultural sector. Known for its robust construction and innovative features, this attachment is ideal for enhancing productivity in various land management tasks.

One of the main features of the Land Pride 357-044M is its heavy-duty design, which is specifically built to withstand the rigors of daily use in demanding environments. The durable frame ensures longevity, allowing operators to tackle tough soil conditions without worrying about equipment failure. Additionally, the implement is equipped with high-quality materials that resist wear and tear, providing peace of mind for long-term reliability.

The 357-044M shines in its versatility. It can be used for a variety of applications, such as leveling ground, grading, and even snow removal in winter months. With adjustable features, operators can easily modify the attachment to suit specific job requirements, making it a multi-functional tool for land preparation.

Equipped with advanced technologies, the Land Pride 357-044M includes precision-engineered components that optimize performance. The attachment’s unique blade design enhances soil mixing and aeration, leading to improved crop yields. Furthermore, the implement's innovative hydraulic system allows for smooth and efficient operation, ensuring that the tool can be adapted to different tasks with minimal effort.

Operator comfort and efficiency are also key characteristics of the 357-044M. The implement features user-friendly controls, making it easy to operate even for those who may be unfamiliar with such equipment. The design takes into account ease of attachment and detachment from various tractors, promoting a seamless workflow on the job site.

In summary, the Land Pride 357-044M is a versatile and dependable implement that combines a robust design, innovative technologies, and operator-friendly features. Its ability to perform multiple tasks makes it an essential addition to any agricultural operation. With a focus on durability and efficiency, this attachment is sure to stand the test of time while delivering the performance that land management professionals demand.
Top Page Image Contents