Land Pride 357-044M Maintenance Schedule, Service at Intervals Indicated Every Refer to Hours

Land Pride	Table of Contents
Section 4: Maintenance & Lubrication
Maintenance Schedule
Service at Intervals Indicated	Every	Every		Every	Every	Refer to
	25 Hours	50 Hours		100 Hours	200 Hours	Page
Clean mower, Deck & Engine Cooling System		Daily (After engine has cooled.)				28
Verify Safety Start Interlock System		Daily (Before each use)				13
Inspect Unit for loose hardware and damage		Daily (Before each use)				28
Visually Inspect Tires		Daily (Before each use)				29
Check Engine Oil Level	Daily (Before each use or every 4 hours, whichever comes					32
			first)
Clean Air Intake Screen	Daily (Before each use or every 4 hours, whichever comes					33
			first)
Check Fuel Level		Daily (Before each use)				31
Blades - Sharp & Securely Fastened		Daily (Before each use)				28 & 34
Discharge Chute -		Daily (Before each use)
Securely In Place & In Lowest Position
Service Air Cleaner (6)	X					33
Grease Blade Spindle Bearings	X					37
Change Engine Oil & Filter (1)		X				32
Clean Cylinder And Head Fins		X				33
Check Battery Connections		X				9 & 29
Check Tire Pressure With A Gauge		X				29
Clean Engine Exterior (3)		X				33
Grease Deck Lift Pivot Points (8)				X/M		38
Grease Front Azle Center Pivot (8)				X/M		38
Grease Gauge Wheel Bearings				X		38
Check Pump And Deck Belt Tension (4)				X		33
Check Fuel and Hydraulic Lines (5)				X		31
Tighten Lug Nuts On Wheels (2)				X		28
Replace Air Cleaner Paper Element				X		33
Change Fuel Filter				X		32
Replace Spark Plugs					X	33
Change Transaxle Hydraulic oil & Filter (7)					X	30

NOTES:

1.Initial engine oil and oil filter change is after the first 5 hours of operation. Thereafter, change engine oil and oil filter every 50 hours of operation. Change every 25 hours when operating the engine under dusty or dirty conditions, heavy load, high temperatures and hot weather periods. Refer to Engine Owner’s Manual.

2.Torque lug nuts initially and after first 2 hours of operation.

3.Refer to Engine Owner’s Manual.

4.Inspect pump and deck belt tensions every 6 months or 100 hours and replace if worn or cracking is noticed. Otherwise, replace every 200 hours or 2 years whichever comes first.

5.Check fuel line hoses, fuel valve and grommet for any cracks or leaks.

6.Clean air cleaner more often under dusty conditions or when airborne debris is present. Replace air cleaner, if very dirty.

7.Initial transaxle hydraulic oil and filter change is after the first 50 hours of operation. Thereafter, change transaxle hydraulic oil and filter ever 200 hours of operation.

8.X/M = Service per hours indicated in column or monthly (whichever comes first).

2/27/07 Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-044M 27