Land Pride 357-187M Table of Contents, Specifications & Capacities, General Specifications, Fuel

Table of Contents

Section 5: Specifications & Capacities

Land Pride

General Specifications

Mower Model No‘	Z44		Z52
Starter	12-volt (.8 KW), solenoid shift positive engagement. w/Honda Engine
	12-volt (.8 KW), industrial Starter w/Briggs & Stratton Engine
Charging System	12-volt, 20 amp w/Honda Engine
	12-volt, 16 amp w/Briggs & Stratton Engine
Governor		Mechanical
Fuel	Unleaded gasoline with octane rating of 87 or higher
Fuel Capacities		12 US GAL
Ground Speed		Forward: 0-7.5 MPH
		Reverse: 0-5.5 MPH
Steering Type	Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls	Speed, forward, reverse, brake, turns and park.
Steering Turning Radius	True zero degree. Turns with counter-rotating independent drive wheels
Brake Service	Hydrostatic dynamic braking
Park Brakes	Spring applied electric release pawl over cog wheel.
Mower Drive	Single V-belt with electric clutch
Safety Features	Operator presence system connected to deck and drive clutches.
Seat	Molded-vinyl seat. Bolt loosening required for forward and reverse adjustments.
	Optional armrests kit for standard molded-vinyl seat.
	Optional deluxe cushion seat with arm rests.
Mainframe Construction	1 1/2" square solid steel.
Drive Motor Mount		1/8” welded steel
Front Caster Wheels	Mounted with roller bearings on each wheel.
Front Caster Forks		3/8” steel.
Deck Thickness	11 Gauge decks with reinforcements welded into spindle mount areas
Reinforced Deck Front	11 GA. x 3 1/2" x 1 1/2” Box-Section
Deck Trim Edges	Solid 1” x 3/8” steel bars for reinforced impact area
Deck Housing Depth	4 1/8” deep, (room for high-capacity mowing)
Deck Lift	Foot-operated deck height adjustment.
	Pin for setting height and transport position.
Hand Operated Controls	Ignition switch, throttle lever, control levers, blade engagement switch,
	choke lever and Left/Right Fuel Tank Valve.
Indicators	Engine warning light and hour meter
Cup Holder	Two cup holders molded into the left side fuel tank.
	Accommodates nearly any cup size including Big Gulp.
Cutting Heights	Foot-operated deck height adjustment. Pin for setting height, transport position. Height
	adjustment in 1/4" increments from 1 1/2” to 4 1/2”
Mowing Blades	Heavy-duty, heat-treated, high-lift steel blades
	.20" x 2 1/2" x 15.81"		.20 x 2 1/2” x 17.81”
Blade Tip Speed	16,811 FPM		18,937 FPM
Blade Drive	V-belt drive to all three spindles. Spring tension idler pulleys.
Spindles	Machine ductile housing, 1" diameter high carbon steel shafts
	and greasable ball bearings.
Flotation	Free-floating mower deck using three blades with center blade to the front.
	Mower deck is suspended at the four corners on spring-assisted chains.
	Includes 4 anti-scalp wheels to improve flotation in rolling and uneven terrain.

44 Z44 & Z52 (S/N 526171 & Above) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor® 357-187M 1/12/09