Table of Contents
Section 5: Maintenance & Lubrication
Maintenance Schedule
Land Pride
Service at Intervals Indicated | Every | Every |
| Every | Every | Refer to |
| 25 Hours | 50 Hours |
| 100 Hours | 200 Hours | Page |
Clean mower, Deck & Engine Cooling System |
| Daily (After engine has cooled.) |
| 31 | ||
Verify Safety Start Interlock System |
| Daily (Before each use) |
| 13 | ||
Inspect Unit for loose hardware and damage |
| Daily (Before each use) |
| 31 | ||
Visually Inspect Tires |
| Daily (Before each use) |
| 32 | ||
Check Engine Oil Level | Daily (Before each use or every 4 hours, whichever comes | 36 | ||||
|
|
| first) |
|
| |
Clean Air Intake Screen | Daily (Before each use or every 4 hours, whichever comes | 36 | ||||
|
|
| first) |
|
| |
Check Fuel Level |
| Daily (Before each use) |
| 35 | ||
Blades - Sharp & Securely Fastened |
| Daily (Before each use) |
| 31 & 39 | ||
Discharge Chute - |
| Daily (Before each use) |
|
| ||
Securely In Place & In Lowest Position |
|
|
|
|
|
|
Service Air Cleaner (6) | X |
|
|
|
| 36 |
Grease Blade Spindle Bearings | X |
|
|
|
| 41 |
Change Engine Oil & Filter (1) |
| X |
|
|
| 36 |
Clean Cylinder And Head Fins |
| X |
|
|
| 36 |
Check Battery Connections |
| X |
|
|
| 9 & 32 |
Check Tire Pressure With A Gauge |
| X |
|
|
| 32 |
Clean Engine Exterior (3) |
| X |
|
|
| 36 |
Tighten Lug Nuts On Wheels (2) |
| X |
|
|
| 31 |
Grease Deck Lift Pivot Points (8) |
|
|
| X/M |
| 42 |
Grease Front Axle Center Pivot (8) |
|
|
| X/M |
| 42 |
Grease Caster Wheel Bearings |
|
|
| X |
| 42 |
Check Pump And Deck Belt Tension (4) |
|
|
| X |
| 37 |
Check Fuel and Hydraulic Lines (5) |
|
|
| X |
| 35 |
Replace Air Cleaner Paper Element |
|
|
| X |
| 36 |
Change Fuel Filter |
|
|
| X |
| 36 |
Replace Spark Plugs |
|
|
|
| X | 36 |
Change Transaxle oil & Filter (7) |
|
|
|
| X | 33 |
|
|
|
|
|
|
|
NOTES:
1.Initial engine oil and oil filter change is after the first 5 hours of operation. Thereafter, change engine oil and oil filter every 50 hours of operation. Change every 25 hours when operating the engine under dusty or dirty conditions, heavy load, high temperatures and hot weather periods. Refer to Engine Owner’s Manual.
2.Torque lug nuts initially and after first 2 hours of operation.
3.Remove cooling shrouds and clean cooling areas. Check oil cooler fins and clean as needed. Refer to Engine Owner’s Manual.
4.Inspect pump and deck belt tensions every 6 months or 100 hours and replace if worn or cracking is noticed. Otherwise, replace every 200 hours or 2 years whichever comes first.
5.Check fuel line hoses, fuel valve and grommet for any cracks or leaks.
6.Clean air cleaner more often under dusty conditions or when airborne debris is present. Replace air cleaner, if very dirty.
7.Initial transaxle hydraulic oil and filter change is after the first 50 hours of operation. Thereafter, change transaxle hydraulic oil and filter ever 200 hours of operation.
8.X/M = Service per hours indicated in column or monthly (whichever comes first).
30 Z44 & Z52 (S/N 526171 & Above) Zero Turning Radius Mowers Riding Mowers | 1/12/09 |
