Land Pride | Table of Contents |
Section 1: Assembly and
Accessory Equipment
Anti-Scalping Front Roller
Refer to Figure 1-6:
1.Insert 4 x 10 roller wheel (#5) and spacer tubes (#4) between mounting bracket flanges as shown.
2.Install front roller shaft (#2) through the bracket flanges, spacers and roller.
3.Secure roller shaft with
16570 |
Front Roller Assembly
Figure
Cutting Blades
There are four blade choices to select from based upon soil condition, density of grass, and tractor horsepower. The appearance of the finish cut may vary between low lift and high lift blades. See your Land Pride dealer for blade availability.
Low Lift Blades
Land Pride’s low lift blades are designed for mowing over sandy soil terrain where high suction lift is not crucial. Sand sucked into the blades accelerates blade wear more than normal. Low lift blades are recommended because they produce a lower suction keeping sand uplift and blade wear to a minimum.
Medium Lift Blades
Land Pride’s medium lift blades are great when horsepower is a concern. They produce a medium suction for lifting grass requiring less horsepower than high lift blades. Medium Lift Blades are factory furnished with your mower.
High Lift Blades
Land Pride’s high lift blades develop the greatest suction for lifting grass before cutting for that fresh clean cut look. However, they may require more horsepower especially when cutting tall dense grass. They are not recommended for sandy soil conditions.
Mulching Blades
Land Pride’s mulching blades are designed to chop leaves and/or grass into smaller parts leaving your lawn looking fresher and cleaner than ever before.
Accessory Part Numbers
Land Pride All-Flex Mower Accessories
Part No. | Part Description |
Front Roller
Low Lift Blades (3 blades needed)
Medium Lift Blades (3 blades needed)
High Lift Blades (3 blades needed)
Mulching Blades (3 blades needed)
See your Land Pride dealer for blade availability.
12/10/07 | FDR3590 Rear Discharge Grooming Mowers | 11 |
