![Introduction](/images/new-backgrounds/88989/8898923x1.webp)
Table of Contents
Introduction
Land Pride welcomes you to the growing family of new product owners.
This Rotary Cutter has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance and safe operating practices will help you get years of satisfactory use from the machine.
Application
The Hydraulic Parallel Arm Rotary Cutters are designed and built by Land Pride to provide excellent cutting performance on ditch banks and other sloping areas adjacent to
The RCP2660 and RCPM2660 cutters are adapted for Category 2 or 3
The RCP3060 and RCPM3060 cutters are adapted for Category 2 or 3
The Hydraulic drive requires 540 rpm input PTO speed for RCP2660 & RCP3060 models and 1000 rpm for RCPM2660 & RCPM3060 models. Depending upon hydraulic configuration, two or four duplex hydraulic outlets are required on the tractor to operate the cutter’s parallel arms and deck angle.
See “Section 7: Specifications & Capacities” on page
43 and “Section 8: Features & Benefits” on page 45 for additional information and performance enhancing options.
Using This Manual
•This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.
•The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.
•To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded,
Terminology
“Right” or “Left” as used in this manual is determined by facing the direction the machine will operate while in use unless otherwise stated.
Definitions
NOTE: A special point of information that the operator must be aware of before continuing.
IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.
Owner Assistance
The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.
If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the cutter.
The parts on your cutter have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your cutter require replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and model number when ordering parts from your Land Pride dealer. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1: for the location of your serial number plate.
26964 |
Serial Number Plate Location
Figure 1
10 RCP2660, RCPM2660, RCP3060 and RCPM3060 Parallel Arm Rotary Cutter | 12/16/08 |