Table of Contents

Section 3: Operating Procedures

General Operating Instructions

Upon arriving at the work site, shut-off tractor, set brakes, remove ignition key, and dismount to preform the following checks:

1.Remove and safely store away transport safety chain.

2.Verify that the PTO driveline is approximately level. Adjust the height of the lower 3-point arms if PTO driveline is not level.

3.Visually inspect cutter blades. Make certain they are not overlapped and locked together.

After performing the above checks, return to the tractor and start the engine. Extend cutter’s parallel arms out and position the deck flat on the ground. Adjust cylinder height of the parallel arm and cutting deck for good visibility and unobstructed performance. Set engine rpm at idle or slightly above and engage PTO. Initial start-up vibration is normal and should smooth out after a few revolutions of the cutter blades unless the blades are locked. Shut off the PTO, raise the deck and inspect the blades if the deck continues to vibrate. Otherwise, increase tractor throttle PTO speed to 540 rpm for RCP2660 and RCP3060 series cutters and 1000 rpm for RCPM2660 and RCPM3060 series cutters. Proceed forward at a mowing speed that is comfortable and will produce a quality controlled cut for ground conditions and material density.

The Rotary Cutter is designed with automatic breakaway arms that release when the unit contacts immovable objects or irregular terrain. Arms must be reset to “home position” after each breakaway before cutting operations can resume. See “Breakaway Operating Procedures” on page 29”.

For additional information on performance enhancing options, see “Section 8: Features & Benefits” on page 45 and “Section 7: Specifications & Capacities” on page 43.

It requires patience, practice, and attention to detail to become an expert operator of your Land Pride Parallel Arm Rotary Cutter. The end result is well worth the effort.

Land Pride

30 RCP2660, RCPM2660, RCP3060 and RCPM3060 Parallel Arm Rotary Cutter 316-111M

12/16/08

Page 31 Page 33
Page 32
Image 32
Land Pride RCP3060, RCPM3060, RCPM2660, RCP2660 manual General Operating Instructions
Page 31 Page 33

RCP2660, RCPM2660, RCPM3060, RCP3060 specifications

Land Pride has a longstanding reputation for producing high-quality agricultural equipment, and their line of RCP series rotary cutters, including the RCP3060, RCPM3060, RCPM2660, and RCP2660, exemplifies this commitment. Designed for professional landscapers and farmers alike, these rotary cutters are engineered for durability, efficiency, and performance in managing heavy brush and grass.

The RCP3060 is the largest in the series, boasting a 60-inch cutting width. It is equipped with a robust frame and is compatible with a range of tractors, making it an ideal choice for large-scale property maintenance and land management. The cutter employs a heavy-duty, reinforced cutting deck, which ensures longevity and able to withstand tough conditions. It utilizes a superior blade design that delivers clean and consistent cuts, promoting healthier growth of remaining grass and vegetation.

The RCPM3060, a medium-duty model, also features a 60-inch cutting width but is designed for lighter applications compared to the RCP3060. It incorporates similar build quality but is lighter, making it suitable for smaller tractors while still handling brush and grass efficiently. The integrated slip clutch protects the drive line from damage in case of blade contact with a solid object.

Both RCPM2660 and RCP2660 models provide a more compact solution with a 66-inch cutting width. The RCPM2660 is specifically tailored for medium-duty tasks, while the RCP2660 serves heavy-duty needs. Both cutters promote high productivity and versatility, making them suitable not just for agricultural use but also for commercial landscaping applications. The blades are designed for easy replacement, ensuring minimal downtime during operation.

All models in the RCP series integrate advanced technologies such as a quick-attach feature for easy connectivity, and adjustable side skids to control cutting height effectively. The heavy-gauge steel construction provides enhanced durability and helps reduce vibrations during operation. Furthermore, Land Pride's commitment to safety is reflected in the design with features that minimize dust and debris exposure.

In conclusion, whether you choose the RCP3060, RCPM3060, RCPM2660, or RCP2660, you can rely on Land Pride's RCP series rotary cutters to deliver outstanding performance and reliability, designed to withstand the demands of any landscape maintenance task.
Top Page Image Contents