Belkin F5D7230AU4P Setting your Connection Type if you are a Telstra BigPond Cable User

Alternate Setup Method

Setting your Connection Type if you are a Telstra® BigPond Cable User

[Australia Only] Your user name and password are provided to you by Telstra BigPond. Enter this information below.

Note: Your user name should be the same as your email address, but with the “@bigpond.com” part removed.

Your password should be the same as the password you use for your BigPond email account.

Choosing your state from the drop-down menu (1) will automatically fill in your login server IP address. If your login server address is different than one provided here, you may manually enter the login server IP address by placing a check in the box next to “User decide login server manually” (4) and type in the address next to “Login Server” (5). When you have entered all of your information, click “Apply Changes” (7). After you apply the changes, the Internet Status indicator will read “connection OK” if your Router is set up properly.

(1)

(2)

(3)

(4)

(5)

(7)

Note: You may have to turn your modem off for 20-40 minutes to allow any active BigPond connections to disconnect from BigPond servers.

48