Manually Configuring Computer Network Settings

Note:	The print-server function of this router is not compatible with Mac
	operating systems.	1
In order for your computer to properly communicate with your Router, you will		1

need to change your PC’s TCP/IP settings to DHCP.		2
Manually Configuring Network Adapters in Windows 2000, NT, or XP		2

1. Click “Start”, “Settings”, then “Control Panel”.		3
2. Double-click on the “Network and dial-up connections” icon		3

(Windows 2000) or the “Network” icon (Windows XP).		4
3. Right-click on the “Local Area Connection” associated with your		4
network adapter and select “Properties” from the drop-down menu.
		5
4. In the “Local Area Connection Properties” window, click “Internet		5
Protocol (TCP/IP)” and click the “Properties” button. The following

screen will appear:		6
		6
	(1)
	(1)	7
		7
	(2)
	(2)	8
		8
	(3)	9
		9

		10

5. If “Use the following IP address” (2) is selected, your Router will		11


need to be set up for a static IP connection type. Write the address		12
information the table below. You will need to enter this information		12

into the Router.

6.If not already selected, select “Obtain an IP address automatically”

(1) and “Obtain DNS server address automatically” (3). Click “OK”.

Your network adapter(s) are now configured for use with the Router.

103

Belkin F5D7230AU4P user manual Manually Configuring Computer Network Settings