Belkin F5D7230AU4P Alternate Setup Method, section, To Power Adapter Existing networking cable

Alternate Setup Method

1.5Turn your cable or DSL modem on by reconnecting the power supply to the modem.

Mac or PC computer that was originally connected to the cable or DSL modem

To Power Adapter

Existing networking cable

1

2

3

4

5

6

7

section

Network cable (to computer)

(came with modem)

8

Note: Your Router may have ports in different locations than depicted in the illustration above.

1.6Before plugging the power cord into the Router, plug the cord into the wall, then plug the cord into the Router’s power jack.

1.7Verify that your modem is connected to the Router by checking the lights on the front of the Router. The light labeled “WAN” should be ON if your modem is connected correctly to the Router. If it is not, recheck your connections.

1.8Verify that your computer is connected properly to the Router by checking the lights labeled “LAN 1,2,3,4”. The light which corresponds to the numbered port connected to your computer should be ON, if your computer is connected properly. If it is not, recheck your connections.

9

10

11

12

35