Table of Contents
Section 1: Assembly &
Land Pride
Tractor Controlled Cylinders
Refer to Figure
Each tractor duplex outlet must be capable of infinite variable flow control by the operator and should have center detent “OFF” levers for controlled positioning of the parallel arm and deck cylinders. If gauge wheels are included, “ARM 2” and “DECK” levers must be capable of being placed in float position.
Breakaway Cylinder
Refer to Figure
The breakaway cylinder protects the Rotary Cutter from damage if cutter deck or parallel arm contacts a solid object while moving forward. It does not protect cutter from damage while backing up. Always make certain the area behind the cutter is clear before backing up.
1.Connect six hoses (2 per cylinder) to 3 duplex outlets on your tractor as shown.
2.The hoses on each outlet should be connected such that when the control lever is pushed “forward”, the arm (or deck) extends. If the levers operate in reverse, change hose
24638 |
IMPORTANT: See Figure
1.Locate tension bolt shown in Figure
2.Attach quick disconnect adaptors (customer supplied) to each breakaway hydraulic hose.
3.Attach breakaway hoses to a single duplex outlet on the tractor as shown in Figure
12256 |
Hose | Breakaway Cylinder Hose Connections | |
Figure | ||
Figure | ||
|
18 RCP2660, RCPM2660, RCP3060 and RCPM3060 Parallel Arm Rotary Cutter | 12/16/08 |