Land Pride RBT1560 Application, Using This Manual, Owner Assistance, Introduction, Terminology

Land Pride

Introduction

Table of Contents

Land Pride welcomes you to the growing family of new product owners.

This rear blade has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance and safe operating practices will help you get years of satisfactory use from the machine.

Application

The Land Pride RBT15 Series 3-Way Position Blades are designed for Category I three-point hitch mounting and are adapted for attachment to tractors in the 17 to 40 hp range. They come in 60", 72", and 84" working widths and are compatible with the Land Pride Quick Hitch. An optional support stand is available for those blades not equipped with the stand to accommodate easier blade removal, storage, and remount capabilities. These Blades offer 7 forward and 5 reverse angles and 5 tilt positions. The 14" tall rolled moldboard blade with its reversible cutting edge can be offset twelve inches to the left or right to cover either tractor tire and to allow operators to work right up next to retaining walls, abutments and raised curbing. Skid shoes are available as an accessory to help in maintaining positive depth control around obstacles such as manhole covers and expansion joints. The moldboard can even be removed to accommodate installation of an optional landscape rake attachment.

When you consider all of the performance features and capabilities of the RBT15 Series Blades by Land Pride it is easy to understand why they are an excellent choice for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations on farms, ranches, or home owner lanes or roadways. They are excellent for snow removal in the pulling or the push-blade mode. Their offset and tilt capability make them and excellent choice for construction and maintenance of drainage ditches, waterways, and soil contours. They are also very effective in maintaining silage pit operations.

See “Section 6: Specifications & Capacities” on page 12

and “Section 7: Features and Benefits” on page 13 for additional information and performance enhancing options.

Using This Manual

•This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.

•The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.

•To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded, free-of-charge from our website at www.landpride.com or printed from the Land Pride Service & Support Center by your dealer.

Terminology

“Right” or “Left” as used in this manual is determined by facing the direction the machine will operate while in use unless otherwise stated.

Definitions

NOTE: A special point of information that the operator must be aware of before continuing.

IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.

Owner Assistance

The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.

If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the rear blade.

The parts on your rear blade have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your rear blade require replacement parts go to your Land Pride Dealer.

Serial Number Plate

For prompt service always use the serial number and model number when ordering parts from your Land Pride dealer. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1 for the location of your serial number plate.

14964

Serial Number Plate Location

Figure 1

2/01/07 RBT1560, RBT1572 & RBT1584 Rear Blades 301-144M 5