Transmitting a Document

•To obtain detailed results of a transmission, print the TX Result Report.

Combination Dial Function

When a dial registered as a Combination Dial is used, you can enter the dial number following the Combination Dial.

Setting a Combination dial:

To register One Touch Dial No. or Speed Dial No. as a Combination Dial, enter the ‘+’ symbol (One Touch Dial key 27[&]) after One Touch Dial number or Speed Dial number.

1 Press "Program" key 3 times.

2 Press ‘2’ of Keypad, then the message “2 SPEED DIAL” appears briefly.

3 Input the Speed Dial No.

4 Input the Fax number by pressing the Keypad.

5 Press the One Touch Dial key 27(&) after the Fax number, the display would shows the ‘+’ symbol.

6 Press "Yes" key.

The display shows a message to confirm the Speed Dial is programmed as shown.

7 Press the "Reset" key to go back to the initial state.

Using the Combination Dial

1 Place the document into the Document Feeding Tray.

2 Check that the Fax screen is shown. If not, press the "Copy/Fax" key to switch. 3 Press "Speed Dial" key. Enter the NO. which registered as a Combination dial.

•The display shows the number programmed in Speed Dial, followed by the symbol ‘+’, indicating that it is a Combination Dial.

4 Enter the other numbers using the dialing as shown:

•Dial No. (Keypad) + "Start" key

•One Touch Dial (which has not yet been registered as a Combination Dial)

•Speed Dial and Keypad

For example: Use the Keypad to input the other numbers(67890) to complete this combination dial. (The symbol ‘+’ will disappear automatically)

Then press the "Start" key to perform the transmission. Note: The following applies to Combination Dial.

•When a One Touch Dial or "Speed Dial" key is used after a Combination Dial,

Basic Fax Operations

3 - 9