Using Auto Start

Using Auto Start

When the copier is first turned ON, it takes only 25 seconds for it to warm-up and come to its Ready condition. During this time, you can set up your copy job, press the Start key and walk away. You can even do this while your copier is in the Energy Saver mode. When the copier comes to its Ready condition, it automatically copies your job.

1

2

Place the original document in the Document Feeder or on the Exposure Glass.

Make your copy requirement selections.

3 Press the Start key. The indicator light in the Start key turns red.

4 The copier automatically begins copying when the copier comes to its Ready condition.

When the copier comes to its Ready condition, the indicator light in the Start key turns green.

Note: To cancel Auto Start, press the Clear/Stop key.

3 - 4

Copier Functions