|
|
| System Settings | |
|
|
|
|
|
System Settings |
|
|
| |
|
|
| ||
| Menu | Description | ||
|
|
| ||
| 1. Function Priority | You can specify the mode to be displayed immediately | ||
|
| after the operation switch is turned on or System Reset | ||
|
| mode is turned on. | ||
|
| Default: Copier | ||
|
|
| ||
| 2. Copy Count Display) | The copy counter can be set to show the number of copies | ||
|
| made (count up) or the number of copies remaining to be | ||
|
| made (count down). | ||
|
| Default: Up (count up) | ||
|
|
| ||
| 3. System Reset | The machine returns to its prioritized mode automatically | ||
|
| after your job is finished, after the selected time. This | ||
|
| function is called “System Reset”. The time can be set | ||
|
| from 10 to 999 seconds, or no system reset. | ||
|
| You can specify the prioritized mode with the user tools. | ||
|
| Default: On (60 seconds) | ||
|
|
| ||
| 4. Energy Saver Timer | The machine enters Low Power mode automatically after | ||
|
| your job is finished, after the selected time. The time can | ||
|
| be set from 1 to 240 minutes. | ||
|
| In Low Power mode, power consumption is reduced by | ||
|
| 30% compared with Standby mode. This value applies to | ||
|
| 5515 Copier features only. | ||
|
| Default:15 minutes | ||
|
|
| ||
| 5. Energy Saver Level | You can select the Energy Saver level. | ||
|
| Level 1 | ||
|
| • | Power Consumption: | |
|
|
| Reduced by about 40% compared standby mode. | |
|
| • | ||
|
|
| about 15 seconds | |
|
| Level 2 | ||
|
| • | Power Consumption: | |
|
|
| Reduced by about 60% compared standby mode. | |
|
| • | ||
|
|
| less than 30 seconds | |
|
| Default: Level 1 | ||
|
|
|
|
|
User Tools Settings | 5 - 3 |