Make sure the toner you add is correct for your copier before loading. See

 

the NOTE above.

Transparencies

A clear plastic stock used to make an overhead transparency. Because

 

they are clear, they don’t feed from paper Drawers or Cassettes. However,

 

many Bypass Feed Trays are designed to handle transparency stock. Place

 

your transparency stock in the Bypass Feed Tray and use a normal copy

 

procedure.

Transport Belt

The rubber surface on the under side of an ADF. It grips an original and

 

moves it across the Exposure Glass and returns it to the Document Exit

 

Area of the Document Feeder. To keep it operating correctly and to

 

prevent the buildup of dirt which can cause dirty copies, it must be

 

cleaned periodically.

User Codes

An option, usually built into a copier that, when activated by a

 

Technician, requires the operator to enter a User Code to make copies.

 

The copier can contain many accounts thereby allowing the Key Operator

 

to track copies made by individuals or departments.

Zoom Keys

The Zoom Keys are actually several keys that control the Enlargement or

 

Reduction of the image on the copy. In most cases, there is a 100% (actual

 

size) key, a key representing the highest Enlargement ratio, and a key

 

representing the lowest Reduction ratio. Pressing these last two keys steps

 

the copier optics in 1% increments. Pressing the 100% key returns the

 

copier to the actual size mode.

G-6