Combine Copying
Combine copy, combines originals into one copy. You cannot use the Duplex or the Bypass Tray with this feature. There are two types of copies that you can make in this mode:
1.1 Sided 2 Pages to Combine 1 Side: Copies two
2.1 Sided 4 Pages to Combine 1 Side: Copies four
•The number of originals copied (combined) can be 2 or 4.
•In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on the copy paper sizes and the number of originals.
•You can change the reproduction ratio from
•When you set the originals in the document feeder and the machine is installed the extension memory, you can change the reproduction ratio from
•If the calculated ratio is under the minimum ratio, it is corrected within the range of the ratio automatically. However, with some ratios, parts of the image might not be copied or blank margins appear on copies.
•Even if the direction of originals is different from that of the copy paper, the machine will automatically rotate the image by 90 to make copies properly. (When the Auto Reduce/Enlarge function is selected.
•You can make copies even if the number of originals is less than the number
required in the selected mode.
• When the number of originals placed is less than the number specified for combining, the last page(s) will be copied blank as shown in the illustration.
Direction of Originals and Layout of Combined ImagesPortrait Originals4 - 4 | Copying Methods |