Lanier 5515, 5518 Copier Features, Copier Feature Settings

			Copier Feature Settings
Copier Features
		Menu	Description
	1.	APS.Auto R/E	You can select Auto Paper Select or Auto R/E Priority.
			When you cancel this setting, select “No”.
			Default: Auto Paper Select
	2.	Max.Copy Q'ty	The maximum copy quantity can be set between 1 and 99.
			Default: 99
	3.	Adjust Orig. Mode	You can adjust the quality level of copies for each of the
			original types. As a default setting, Text is selected as
			original type. You can change it to Photo.
			Default: Text
	4.	Set Ratio	Select which Reduce, Enlarge, or Input Ratio is shown on
			the panel display with priority when the Reduce/ Enlarge
			key is pressed.
			Default: 50%
	5.	Copy Reset Timer	The machine returns to its initial condition automatically
			after your job is finished. The time can be set from 10 to
			999 seconds, or Off.
			Default: On / 60 sec.
	6.	SADF Auto Reset	When you set one original at a time in the optional
			document feeder, the message is displayed. It shows the
			document feeder is ready for another original. You can
			adjust this time from 3 seconds to 99 seconds in 1 second
			steps.
			Default: 4 seconds
	7.	R.Sort Aut.Cont	If you select “Off” when the paper tray in use runs out of
			paper, the machine stops allowing you to add paper to the
			tray so you can have all the copies rotate-sorted.
			Default: Off
	8.	Orientation	You can select the paper orientation (“Top to Top” or “Top
			to Bottom”).
			Default: Off
	9.	Sort	You can select a Sort function.
			Default: Rotate Sort
	12. Key Op.Tools
	If the machine is set to use the User Code function, operators must input their user codes
	before the machine can operate. The machine can keep count of the number of copies
	made under each user code.

User Tools Settings 5 - 7