Lanier 5515, 5518 Cause, Action, Problem, When Copies are Not Clear

			When Copies are Not Clear
When Copies are Not Clear
	Problem	Cause	Action
	Copies appear dirty.	The image density is set too	Adjust the image density.
		dark
	The reverse side of an original	The image density is set too	Adjust the image density.
	image is copied.	dark.
	A shadow appears on copies if	The image density is too dark.	Adjust the image density.
	you use pasted originals.
			Change the direction of the
			originals.
			Put tape on the pasted part.
	The same copy area is dirty	The exposure glass or	Clean them.
	whenever making copies.	document feeder is dirty.
	Copies are too light.	The image density is set too	Adjust the image density.
		high.
		Damp or rough grained paper is	Use the recommended dry
		used.	paper.
		Toner cartridge is almost	Add toner.
		empty.
	Parts of the image is not copied.	The original is not set correctly.	Set the original correctly.
		An improper paper size is	Select proper paper size.
		selected.
	Copies are blank.	The original is not set properly.	When using the exposure glass,
			set the originals face down.
			When using the document
			feeder, set the originals face
			down.
	A watery or wavy pattern is	Your original has a dot pattern	Place the original on the
	produced on copies.	image or many lines.	exposure glass at a slight angle.

Service and Supplies 6 11