Bypass Copying

When Copying onto Non-Standard Size Paper

Note: You should specify the size of copy paper to avoid paper misfeeds

Note: The settings for non-standard size paper can be made only when the optional document feeder is installed.

1.Press the (#) key.

2.Make sure that “1.Paper Size” is displayed, then press the OK key.

3.Press the Cursor keys until “Custom size” is displayed, then press the OK key.

4.Enter the horizontal size of the paper using the keypad, then press the OK key.

To change the number entered, press the

Clear/ Stop key and enter the new number.

5.Enter the vertical size of the paper using the keypad, then press the OK key.

•To change the number entered, press the {Clear/ Stop} key and enter the new number.

•When you copy onto plain paper, go to step 6.

6.When copying onto thick paper, press the {#} key to return to the Bypass menu.

7.Press the right Cursor key to select “Thick/ OHP”, then press the OK key.

8.Press the OK key.

9.Set originals and press the Start key.

When Copying onto Non-detected Standard Size Paper

1.Press the (#) key.

2.Make sure that “1.Paper size” is displayed, then press the OK key.

3.Press the Cursor keys until “Standard Size” is displayed and press the OK key,

4.Press the Cursor keys until the desired size is displayed. Then press the OK key. When copying onto plain paper, go to step 5.

5. When copying onto thick paper, press the # key to return to the Bypass setting menu.

6.Press the right Cursor key to select “2 Paper Type”, then press the OK key.

7.When “THICK/OHP” is displayed, press the OK key.

8.Press the OK key.

9.Set your originals, then press the Start key.

Copying Methods

4 - 3