AppleTalk Configuration
7 - 2
7.2 Macintosh Services
Before attempting to print from a Macintosh, ensure that AppleTalk and PostScript are both
enabled on at least one service. Once the service is configured, it will appear in the Chooser in the
same zone as the EPS. Select the service in the Chooser and complete the appropriate setup
options. Then close the Chooser window and print a test page of text to the Macintosh service.
7.3 AppleTalk Zones
If there is a router on the network, the EPS will appear in the default zone specified by the router.
To change the default zone use the Define Protocol AppleTalk Zone command.
If the EPS is attached to a network without an AppleTalk router, all AppleTalk devices (including
the EPS) will appear in the default zone in the Chooser.
NOTE: If no router is present on the network, the EPS will not accept AppleTalk
print jobs for 60 seconds after booting.